Change View

Middle Mouse

视角全靠鼠标:中键拖动旋转,Shift+拖动平移,Ctrl+拖动或滚轮缩放。

  • Drag Middle Mouse to Rotate the view. It rotates around an invisible Point of Interest.

  • Hold Shift and drag to Move the point of interest.

  • Hold Ctrl and drag or roll the Mouse Wheel to Zoom in and out

Axis View

Numpad 1 – 9

小键盘 1/3/7 看正前、右侧、顶部,9 反向,5 正交,2/4/6/8 每次转 15°。

  • Num 1, Num 3 & Num 7 to view from Front, Side & Top.

  • Num 9 to Invert the current view direction.

  • Num 5 to toggle Orthographic view.

  • Num 2, Num 4, Num 6, Num 8 to Rotate the view in 15° steps.

Camera View

Numpad 0

小键盘 0 切到场景相机视角;加 Ctrl 指定相机,Ctrl+Alt 反过来让相机对齐当前视角。

  • Numpad 0 to align the view with the scene camera.

  • Ctrl + Numpad 0 to align the view with the selected camera and make it the scene camera.

  • Ctrl + Alt + Numpad 0 to align the scene camera with the current view.

Frame Selected

Numpad .

小键盘 . 把视图拉到选中物;/ 进局部视图,只显示选中的东西。

  • Numpad . to set the Point of Interest to the current selection.

  • Numpad ∕ to toggle Local View which also hides all but the selected object.

Change Mode

Ctrl + Tab

Ctrl+Tab 列出所有模式;Tab 在物体模式和编辑模式之间直接切。

  • Ctrl + Tab to see all available modes.

  • Tab to toggle Edit mode directly.

  • If the cursor is hovering a timeline, Ctrl + Tab to toggle graph view.

Switch Object

Alt + Q

Alt+Q 切到鼠标悬停的物体,不改变当前模式,摆姿势时也能用。

  • Alt + Q to switch to the hovered object without changing modes.

  • Works with all modes, including Pose Mode on Armature objects.

Move

G

G 抓起选中物跟着鼠标走;按 X/Y/Z 锁轴,连按两次切局部轴,加 Shift 排除某轴。

  • Press X, Y or Z to lock to an axis. Press twice to switch from global to local axes.

  • Shift + X, Y or Z to exclude an axis.

  • In Edit Mode, press G twice to slide along existing edges.

Rotate

R

R 旋转;按 X/Y/Z 锁轴,连按两次进入万向节模式。

  • Press X, Y or Z to lock to an axis. Press twice to switch from global to local axes.

  • Shift + X, Y or Z to exclude an axis.

  • Press R twice to switch to gimbal mode.

Scale

S

S 缩放;同样支持锁轴,连按两次切到局部轴。

  • Press X, Y or Z to lock to an axis. Press twice to switch from global to local axes.

  • Shift + X, Y or Z to exclude an axis.

Add

Shift + A

Shift+A 调出添加菜单,加物体、加网格还是加节点,取决于当前上下文。

  • Shift + A adds new data.

  • Depending on the context, this can be a new object, a new mesh inside the active object or a new node.

Delete

X

X 删除选中:物体模式删物体,编辑模式删点、线、面。

  • Press X in Object Mode to delete selected objects.

  • Press X in Edit Mode to delete selected vertices, edges or faces.

Hide

H

H 隐藏选中,Shift+H 只留选中、其余全藏,Alt+H 全部恢复。

  • H to hide the selection.

  • Shift + H to hide everything but the selection.

  • Alt + H to unhide all.

  • Meshes that are hidden in Edit Mode are visible in Object Mode.

Duplicate

Shift + D

Shift+D 复制一份;Alt+D 做关联复制,两者共用同一份数据。

  • Shift + D to duplicate the selection.

  • Alt + D in Object Mode to create Linked Duplicates, which reference the original data instead of copying it.

Change Shading

Z

Z 呼出着色饼菜单;Shift+Z 切线框和透视,Alt+Z 只切透视。

  • Shift + Z to toggle Wireframe and X-ray , to see and select through the mesh.

  • Alt + Z to only toggle X-ray.

Selection Modes

1, 2, 3

1/2/3 切换点、线、面选择;切换时已选内容可能跟着变。

  • 1 for vertex select.

  • 2 for edge select.

  • 3 for face select.

  • Switching modes can change the selection!

Snap

Shift + S

Shift+S 打开吸附菜单,把东西精确挪到另一处,最常用来摆 3D 游标。

  • Move one thing precisely to another, especially useful to position the 3D Cursor.

  • Shift + Right Mouse to set the 3D cursor by hand.

Snap (Toggle)

Ctrl

按住 Ctrl 临时开启吸附,G/R/S 和滑杆都生效。

  • Hold Ctrl to enable snapping.

  • Works with Move, Rotate and Scale as well as Sliders

  • You can snap to increments (default) or geometry (vertices, edges, faces).

Snap (Base)

B

G/R/S 进行中按 B 指定吸附基点:第一次点基点,第二次点目标。

  • After Move, Rotate or Scale, press B to enable base snapping.

  • First click sets the snap base, second click sets the snap target.

Clear Transform

Alt + G, R, S

Alt+G/R/S 分别把位置、旋转、缩放清零,仅物体模式有效。

  • Only in Object Mode

  • Alt + G to clear location.

  • Alt + R to clear rotation.

  • Alt + S to clear scale.

Apply

Ctrl + A

Ctrl+A 把变换烘焙进数据;鼠标悬停在修改器上可直接应用该修改器。

  • Only in Object Mode

  • Ctrl + A to apply changes to the transform.

  • Applies modifiers if hovered in the list.

Repeat Last

Shift + R

Shift+R 重复上一个操作,并以上一次的结果为起点继续。

  • Shift + R to repeat the last action.

  • Repeats Move, Rotate and Scale relative to the result of the previous action.

Select All

A

A 全选,Alt+A 取消全选;选什么取决于当前上下文。

  • A to select all objects, meshes, keyframes etc. depending the context.

  • Alt + A to deselect all.

Add to Selection

Shift + Left Mouse

Shift+左键点未选的加选,点已选的从选择里去掉。

  • Shift + Left Mouse on unselected to add to the selection.

  • Shift + Left Mouse on selected to remove from the selection.

Select Loop

Alt + Left Mouse

Alt+左键点边选整圈循环;加 Shift 可增删,只对四边面有效。

  • Alt + Left Mouse while the cursor is close to a crossing edge.

  • Alt+Shift+Left Mouse to add or remove loops from the selection.

  • Only works on multiple faces if they are four-sided ("quads").

Select Path / Area

Ctrl + Left Mouse

Ctrl+左键补最短路径;加 Shift 拖出一块区域加选。

  • Ctrl+Left Mouse to add the shortest path of vertices or faces to the selection.

  • Ctrl+Shift+Left Mouse to add or remove an area.

Select Linked

L

L 选中光标下相连的所有元素;Ctrl+L 按当前选择扩散,Shift+L 去掉。

  • L to select all linked vertices under the cursor.

  • Shift + L to remove all linked vertices from the selection

  • Ctrl + L to select what is linked to the current selection.

Select More / Less

Ctrl + Num +

Ctrl+小键盘 +/- 向外扩选或向内缩选一圈;加 Shift 沿用上次的间距。

  • Ctrl + Num + to select more.

  • Ctrl + Num - to select less.

  • Ctrl + Shift + Num + to select more elements with the same distance as the last two.

Select Similar

Shift + G

Shift+G 选中特征相近的元素,物体和节点也适用。

  • Shift + G to select all with similar traits to the current selection.

  • Also works with objects or nodes selected (Select Grouped)

Extrude

E

E 挤出并直接跟着鼠标走;按 Esc 结束会留下一圈重合点。

  • E to extrude a connected copy of the selected mesh and wait for input to be moved.

  • ESC or Right click to end the extrusion without moving it. Creates "doubles"!

  • Alt + E for more options.

Inset

I

I 在选中面里内插一圈;再按 I 改为逐面内插,O 反向成外扩,B 控制边界。

  • I to inset around the selected faces.

  • Press I again to inset individual faces.

  • Press O to toggle outset.

  • Press B to toggle boundary.

Add Face

F

F 补面,两个孤立点之间按 F 只会连出一条边。

  • F to add a new face to the mesh. Adds a loose edge if two separate vertices are selected.

  • Alt + F to fill Ngons with triangles.

  • Ctrl + F to bring up all face options including "Grid Fill"

Merge

M

M 合并顶点;按距离合并能一次清掉挤在一起的重复点。

  • Merge all selected vertices at a specified location.

  • Merge By Distance to remove vertices that are closer than the threshold value, which you can set in the context menu.

Rip

V

V 撕开顶点或边,撕开方向由鼠标位置决定;Alt+V 撕开并补面。

  • V to rip vertices or edges.

  • Alt + V to rip and fill.

  • The rip direction is determined by the cursor position.

Split

Y

Y 把选中部分断开,但仍属于同一个物体和数据块。

  • Y to split the selection.

  • Alt + M to split all selected faces by their edges.

  • The selection is disconnected but still part of the same data block and object.

Separate

P

P 把选中部分拆成独立物体,原来的修改器会一起带过去。

  • P to separate the selection into a new object.

  • The new object will have the same modifiers as the object it was separated from.

Loop Cut

Ctrl + R

Ctrl+R 环切,滚轮加减段数,同样只对四边面有效。

  • Ctrl + R to cut a face loop into segments.

  • Roll the Mouse Wheel to change the number of segments.

  • Only works on multiple faces if they are four-sided ("quads").

Connect Path

J

J 按选点的先后顺序连成边,穿过已有面时会自动补顶点。

  • J to connect vertices in the order in which they were selected.

  • Cuts into faces and creates additional vertices when the path intersects with existing edges.

Bevel

Ctrl + B

Ctrl+B 倒角边,Ctrl+Shift+B 倒角顶点,滚轮调段数。

  • Ctrl + B to bevel edges.

  • Roll the Mouse Wheel to adjust the number of segments.

  • V to toggle vertex bevel.

  • C to toggle clamping.

  • P to adjust the bevel profile.

Dissolve

Ctrl + X

Ctrl+X 融并:删掉点但把周围边接起来;X 菜单里的 Limited Dissolve 按角度批量融并。

  • Ctrl + X to delete vertices but connect the surrounding edges. The result is based on the selection mode.

  • X > Limited Dissolve dissolves all vertices/edges below a treshold angle.

Shrink/Fatten

Alt + S

Alt+S 沿顶点法线推拉,是加厚减薄,不是整体缩放。

  • In Edit Mode, Alt + S to move vertices along their vertex normals.

Proportional Editing

O

O 开关衰减编辑,滚轮改影响半径,Shift+O 换衰减曲线。

  • O to toggle proportional editing.

  • Roll the Mouse Wheel to change the radius.

  • Shift + O to change the falloff profile.

Rename

F2

F2 重命名当前物体,Ctrl+F2 批量重命名多个物体。

  • F2 to rename the active object.

  • Ctrl + F2 to Batch Rename several objects at once.

Extrude to Cursor

Ctrl + Right Mouse

Ctrl+右键挤出到 3D 游标处,同时还能调整上一段的方向。

  • Ctrl + Right Mouse to extrude to the cursor position and adjust the rotation of the previous segment.

  • Extrusions will be placed at the depth of the 3D cursor.

Granular Input

Shift

按住 Shift 让鼠标位移变慢,方便精细微调,滑杆也适用。

  • Hold Shift to divide the mouse input for more precise control.

  • Works with Move, Rotate and Scale as well as Sliders

Multi-Edit

Alt

多选物体时默认只改活动物体,按住 Alt 才能改所有选中的物体。

  • If you have multiple objects selected, editing parameters will only affect the active object.

  • Hold Alt to change the parameters of all selected objects instead.

To Sphere

Shift + Alt + S

Shift+Alt+S 把选中顶点往球面推,能把一圈点拉成正圆,球心在 3D 游标。

  • Shift + Alt + S moves selected vertices to approach a sphere with the 3D cursor at the center.

  • Turns a single loop of vertices into a circle.

Subdivision Surface

Ctrl + 1

Ctrl+1/2/3 加上对应层级的细分曲面修改器,Ctrl+0 关掉它。

  • Ctrl + 1, 2, 3 to add a subdivision surface modifier with corresponding levels.

  • Ctrl + 0 will disable the modifier (level 0).